1 4

pH sensor Kit with pH Electrode Probe

pH sensor Kit with pH Electrode Probe

First Come First Serve Offer (T&C Apply )

1,837.50
0.00 1,837.50
Sale Sold out
Shipping calculated at checkout.

This pH sensor is commonly used to test the pH of a liquid as it measures the hydrogen-ion activity in water-based solutions. Wherever acidity and alkalinity testing is required, it is frequently employed in the chemical businesses, pharmaceutical industry, dye industry, and scientific research. This kit's drive board works with both 9V systems. It's also very easy to work with Arduino and Raspberry Pi thanks to the standard BNC probe interface and Grove connection. A Power Indicator LED, a BNC connector, and a PH2.0 sensor interface is all included.

To use it, simply connect the pH sensor to the BND connection and plug the PH2.0 interface into any Arduino controller's analog input port. If pre-programmed, you will get the pH value easily. Comes in a compact plastic box with foams for better mobile storage. The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. The PH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter, controller, or any pH device which has a BNC input terminal. The pH electrode probe is accurate and reliable that can give almost instantaneous readings.

Cautions: 

  1. Before being measured, the electrode must be calibrated with a standard buffer solution of known PH value. In order to obtain more accurate results, the known PH value should be reliable, and closer to the measured one.
  2. When the measurement is completed, the electrode protective sleeve should be put on. A small amount of 3.3mol / L potassium chloride solution should be placed in the protective sleeve to keep the electrode bulb wet.
  3. The leading end of the electrode must be kept clean and dry to absolutely prevent short circuits at both ends of the output, otherwise, it will lead to inaccurate or invalid measurement results.
  4. After long-term use of the electrode, if you find that the gradient is slightly inaccurate, you can soak the lower end of the electrode in 4% HF (hydrofluoric acid) for 3-5 seconds, wash it with distilled water, and then soak in potassium chloride solution to make it new.

 

Features:

  1. Widely used in the chemical industry, pharmaceutical industry, dye industry, and scientific research
  2. Support with both Arduino and Raspberry Pi
  3. Compact size for easy deployment and cost-effective
  4. Resolution: at most ±0.15PH (STP)
  5. Probe replaceable
Specifications

Operating Voltage

9V

Current

1A

Measuring Range

0-14 pH

Accuracy 

± 0.1 pH

Resolution

± 0.15PH（STP）

Temperature range

0-60℃

Zero-point

7 ± 0.5PH

Response time

1 min

Probe Interface

BNC

Wire length

80cm

L*B*H

93.4*54.9*14.2mm
Country of Origin China

T&C Apply.

Terms and Conditions

1. Product Images and Representations

  • Images displayed on the website are for illustrative purposes only. The actual product may vary in color and design.

2. Offers and Returns

  • Products purchased during promotional offers may not be eligible for return. Please refer to the specific offer details for clarification.
  • We offer a standard return policy for most products, with some exceptions for products purchased during offers.

3. Availability and Out-of-Stock Products

  • All products listed on the website are available on a first-come, first-served basis.

Following are the stock percentages available in the sale:

Xiaomi: 15%

Vivo: 5%

Samsung: 5%

Realme: 8%

OPPO: 10%

OnePlus: 4%

Apple: 4%

Poco: 2%

Infinix: 10%

Feature Phones: 32%

Tecno: 5% 

We reserve the right to limit quantities.

  • In case of stock depletion, we may offer a replacement product of similar value.
  • If you are not satisfied with the replacement, we will credit your account with the purchase amount. This credit can be used towards future purchases, but no cash refunds will be issued.

4. Product Exchanges

  • We offer exchanges for products that are broken or damaged upon arrival. Please refer to our return policy for details on initiating an exchange.

5. Refurbished Electronics

  • Electronic products listed under the "website " may be old refurbished, meaning they were previously owned. These products will be clearly marked as refurbished.

  • the branded box, charger, accessories will not be included with the mobile phone.

6. Customer Satisfaction and Credits

  • If you are unhappy with any product, we may offer you a coupon code for a future purchase instead of a cash refund.

7. Shipping and Delivery

  • Our standard shipping method is surface mode, which may result in longer delivery times. Typical delivery times range between 8-15 business days.

8. Acceptance of Terms

All products sold on a first-come, first-served basis are subject to our No Refund Policy. As part of this policy, the company will randomly select five customers out of every 100 orders to receive smartphone products. The remaining orders may be canceled, or the customer may opt to receive a branded T-shirt of equivalent value. If the customer objects to receiving a T-shirt or want for refund,

A full refund will be issued to their company-created digital wallet within 30 days. Please note that this offer is discretionary and involves a risk of non-receipt of the desired product. By placing an order, you acknowledge and agree to these terms."

View full details